All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you. -
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Contact Person :
Jane
Phone Number :
86-13685240516
Whatsapp :
+8613685240516
Keywords [ small end mill ] match 65 products.
Solid Custom Carbide End Mills Metal Cutting Tool 2/3 Flute Taper With Coating
| Name: | Carbide Conical End Mill |
|---|---|
| Number Of Flutes: | 2/3/4 |
| Coating: | Customized |
Carbide OEM Conical End Mill 3 Flutes Cnc Milling Cutter For Steel
| Name: | Carbide Conical End Mill |
|---|---|
| Center Cutting: | Yes |
| Coating: | AlTiN AlTiSiN DLC |
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Diameter: | R1.5 |
| Flute Length: | 6mm |
3 Flutes 20mm 13/16 Roughing End Mill Aluminum With Coarse Pitch
| Product Name: | HRC50 3 Flute 20mm Aluminum End Mill For Rough Milling |
|---|---|
| Flute Dia: | 20mm |
| Flute Length: | 45mm |
HRC65 2 Flutes Carbide Ball Nose End Mill 10mm Extra Long For Tool Steel
| Product Name: | HRC65 Ball Nose End Mill |
|---|---|
| Brand: | RLD |
| Diameter: | R5 |
Metric End Mill 3 Flute Carbide Roughing End Mills For Wood CNC Milling Cutter
| Product Name: | HRC50 Roughing End Mills For Wood |
|---|---|
| Coating: | Uncoated/DLC Coating |
| Raw Material: | ZY10EF |
1/25" 1mm Double Flute End Mill 2 Flute Milling Cutter Slot Mills
| Product Name: | HRC55 2 Flute 1mm Solid Carbide End Mill |
|---|---|
| Flute Diameter: | 1mm |
| Flute Length: | 3mm |
10mm 3/8" Fine Pitch Roughing End Mill Carbide HRC60 4 Flutes
| Product Name: | HRC60 Roughing End Mill For Steel 10mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
Fine Pitch Roughing End Mills 18mm 3/4 Carbide Roughing End Mill 4fl
| Product Name: | HRC60 Roughing End Mill For Steel 18mm |
|---|---|
| Coating: | AlTiN |
| Raw Material: | GU25UF |
0.393" 3/8 Large Cobalt Carbide Roughing End Mill
| Product Name: | HRC50 3 Flutes Roughing End Mill For Aluminum |
|---|---|
| Coating: | Uncoated/customized |
| Raw Material: | YG10X Carbide |